Automotive Specialty Hand Tools
Two-Purpose Folding Rivet Nut Tool
A two-purpose folding nut and pull rivet tool with five nutsert mandrels (M4-M10) and five rivet adapters (3.2-6.4 mm), weighing 265 g.
PRODUCT RANGE
Automotive Repair, Specialty & Hand Tools
Explore seven categories of automotive repair, specialty and hand tools for distributors, importers and aftermarket brands, with wholesale, OEM & private label, and custom development support.
- CATEGORIES
- 7 core tool categories
- SOURCING
- Wholesale · OEM & Private Label
- CUSTOM DEVELOPMENT
- From drawings, samples or requirements
Product Categories
Browse the Range by Category
Seven categories covering the repair and maintenance jobs a workshop handles every day. Open a category to see the tools in that line.
Brake Service Tools
Caliper wind back kits, brake bleeder kits, brake line flaring tools, drum brake tool sets and brake cylinder hones.
Engine Service Tools
Cylinder hones, piston ring compressors, valve stem seal tools and belt tensioner wrenches.
Testing & Diagnostic Tools
Compression testers for petrol and diesel engines, cooling system pressure testers and circuit testers.
Oil & Fluid Service Tools
Oil filter wrenches, oil filter sockets and fluid filling and transfer tools.
Body, Trim & Glass Tools
Windshield and glass removal tools, trim and panel removal sets, and clip pliers.
Suspension, Steering & Bearing Tools
Coil spring compressors, ball joint separators, bearing pullers, press and pull sleeve kits and inner tie rod tools.
Automotive Specialty Hand Tools
Hose clamp pliers, CV boot clamp tools, thread repair kits, inspection mirrors and magnetic pick-up tools.
All products
52 products
View product
Testing & Diagnostic Tools
TU-21 Cylinder Leak Detector Kit
A TU-21 cylinder leak detector kit for locating pressure loss in engine cylinders, supplied in a blow case with a pressure gauge, cylinder leakage gauge, air regulator, flexi hose and spark plug adapters.
Body, Trim & Glass Tools
Universal Windshield Wiper Arm Puller
A universal windshield wiper arm puller in carbon steel for removing stuck wiper arms, with a jaw opening of 9-43.8 mm and a net weight of 262 g.
Oil & Fluid Service Tools
1.5L Manual Fluid Extractor Pump
A 1.5 L manual fluid extractor pump in PP and nylon, supplied with a transparent fluid syringe with locking adapter, 2 hose clamps, 3 adapters and 3 nozzles.
Testing & Diagnostic Tools
TU-443 Engine Fuel System Oil Pressure Tester
A TU-443 engine fuel system oil pressure tester with a 3.5-inch digital display measuring 0-140 PSI (0-10 bar), stated for petrol and diesel engines.
Brake Service Tools
18pcs Hydraulic Flaring Tool Set
An 18-piece hydraulic flaring tool set for forming brake line ends during repair or replacement work. The set covers the clamp pairs and saddles listed in the specifications.
Suspension, Steering & Bearing Tools
Multi-Purpose Inner Tie Rod Tool
A multi-purpose inner tie rod tool made from 45# carbon steel with phosphating finish, for inner tie rod service with a capacity of 27–42 mm. 1/2″ drive. Weight 0.35 kg.
Brake Service Tools
37pcs Brake Caliper Wind Back Tool Kit
A 37-piece brake caliper wind back tool kit for retracting caliper pistons during brake pad replacement. For Audi, BMW, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Saab, Toyota, Volvo, VW and others. Adapter with 3/8″ internal square drive fitting included. For wholesale, OEM and private-label sourcing, send your requirements via the inquiry form or WhatsApp.
Body, Trim & Glass Tools
Windshield Removal Tool Set
A comprehensive 5-piece windshield removal set for bonded windshields, molding, butyl adhesive compound and trim pads: triple-braid galvanized steel wire with two gripping handles, windshield removal tool (rubber gasket knife), wire feeder tool, trim pad remover and windshield molding release tool. Weight 1.03 kg.
Engine Service Tools
Valve Stem Seal Tool Set
A valve stem seal tool set for seal removal and installation on overhead camshaft engines, made of 45# carbon steel in sizes 5, 5.5, 6, 6.5, 7, 8 mm and 3/8″.
Oil & Fluid Service Tools
Transmission Oil Filling System Hand Pump
A transmission oil filling system hand pump with a 15-piece adapter set, connecting easily and quickly to the most common car and truck transmissions for filling and transfer work.
Suspension, Steering & Bearing Tools
Press and Pull Sleeve Kit
A press and pull sleeve kit with 22 sleeve size combinations from 34/44 mm up to 80/90 mm, with five threaded rod sizes M10, M12, M14, M16 and M18.
Page 3 of 5
Sourcing Options
Choose How You Want to Source
Most buyer programs follow one of these three routes. Tell us which fits and we can review the details from there.
01
Wholesale Supply
Source suitable tools from the existing range for distribution, retail and workshop supply. Send your item list and estimated quantities, and multiple categories can be reviewed in one quotation.
02
OEM & Private Label
For suitable existing models, logo, packaging, color and other branding requirements can be reviewed. Samples or specifications are confirmed before production where required.
03
ODM & Custom Development
Start from a drawing, sample, reference image or a new tool requirement. Feasibility, manufacturing options and the next development step are reviewed before quotation and sampling.
CUSTOM SOURCING & DEVELOPMENT
Have a Tool to Source or Develop?
Start with an existing tool, drawing, reference image, physical sample or a clear repair requirement. Tell us what you need and we'll review the most practical sourcing or development route.
connie_fang@coziness.cn
Phone / WhatsApp
+86 13857891035