Suspension, Steering & Bearing Tools
6pcs Drive Shaft Socket Set
A 6-piece drive shaft socket set in CR-MO, specifically designed for front hub nuts, with a 12.5 mm (1/2″) driver, 30/32/36 mm 12-point sockets and 14/17/19 mm impact hexagon keys.
PRODUCT RANGE
Automotive Repair, Specialty & Hand Tools
Explore seven categories of automotive repair, specialty and hand tools for distributors, importers and aftermarket brands, with wholesale, OEM & private label, and custom development support.
- CATEGORIES
- 7 core tool categories
- SOURCING
- Wholesale · OEM & Private Label
- CUSTOM DEVELOPMENT
- From drawings, samples or requirements
Product Categories
Browse the Range by Category
Seven categories covering the repair and maintenance jobs a workshop handles every day. Open a category to see the tools in that line.
Brake Service Tools
Caliper wind back kits, brake bleeder kits, brake line flaring tools, drum brake tool sets and brake cylinder hones.
Engine Service Tools
Cylinder hones, piston ring compressors, valve stem seal tools and belt tensioner wrenches.
Testing & Diagnostic Tools
Compression testers for petrol and diesel engines, cooling system pressure testers and circuit testers.
Oil & Fluid Service Tools
Oil filter wrenches, oil filter sockets and fluid filling and transfer tools.
Body, Trim & Glass Tools
Windshield and glass removal tools, trim and panel removal sets, and clip pliers.
Suspension, Steering & Bearing Tools
Coil spring compressors, ball joint separators, bearing pullers, press and pull sleeve kits and inner tie rod tools.
Automotive Specialty Hand Tools
Hose clamp pliers, CV boot clamp tools, thread repair kits, inspection mirrors and magnetic pick-up tools.
All products
52 products
View product
Body, Trim & Glass Tools
41pcs Poly Rivet Gun Kit
A 41-piece poly rivet gun kit with a rivet gun and 40 POM rivets in four sizes, in steel and POM, for fastening door panels and automotive trims.
Brake Service Tools
7 PCS Brake Wheel Hub Cleaning Kit
A 7-piece brake wheel hub cleaning kit with a 1/4″ shaft holder and six sanding pads, for front and rear brake hubs and rotors on cars, light trucks and SUVs.
Oil & Fluid Service Tools
Fuel Line Clip Release Plier
A fuel line clip release plier in steel and PP, 220 × 65 mm, for disassembling and replacing the connections on the in-line fuel filter.
Engine Service Tools
2 PCS Double Cup Wooden Handle Valve Lapper Tool Set
A 2-piece double cup valve lapper tool set with wooden handles in wood and rubber, covering sizes 5/8″, 13/16″, 1-1/8″ and 1-3/8″ with lengths of 190 mm and 222 mm.
Automotive Specialty Hand Tools
Spark Plug Pliers
Spark plug pliers in steel and PVC for removing problem spark plugs covered in buildup and stubborn boots, with a length of 9″ and a weight of 172 g.
Brake Service Tools
Universal Car Ratchet Caliper Piston Tool
A universal car ratchet caliper piston tool in carbon steel for compressing pistons into calipers, with a capacity of 43-73 mm, a length of 26 cm and a weight of 1.14 kg.
Suspension, Steering & Bearing Tools
Car Truck Ball Joint Splitter
A car and truck ball joint splitter in 40Cr and carbon steel with an 18 mm jaw opening, a hardness of HRV 38-40 and a weight of 435 g.
Oil & Fluid Service Tools
12pcs Fuel Line Clamp And Stopper Kit
A 12-piece fuel line clamp and stopper kit in nylon and steel, supplied with four steel line stoppers, six adapters, an extension hose clamp and a fuel pipe separator.
Testing & Diagnostic Tools
Automotive Stethoscope
An automotive stethoscope for locating noise and trouble in engine and moving parts, with a 67.5 cm length, a 21.8 cm probe and a weight of 90.6 g.
Engine Service Tools
Multi Valve Spring Compressor
A multi valve spring compressor in carbon steel for multi-valve petrol and diesel engines with deep-seated valves, with a universal jaw capacity of 55-175 mm and a throat depth of 165 mm.
Brake Service Tools
3-In-1 Brake Pipe Bender
A 3-in-1 brake pipe bender in aluminum alloy with channel grooves for 3mm, 4mm and 6mm (1/8″, 3/16″ and 1/4″) O.D. tubing, bending 0° to 90°.
Page 2 of 5
Sourcing Options
Choose How You Want to Source
Most buyer programs follow one of these three routes. Tell us which fits and we can review the details from there.
01
Wholesale Supply
Source suitable tools from the existing range for distribution, retail and workshop supply. Send your item list and estimated quantities, and multiple categories can be reviewed in one quotation.
02
OEM & Private Label
For suitable existing models, logo, packaging, color and other branding requirements can be reviewed. Samples or specifications are confirmed before production where required.
03
ODM & Custom Development
Start from a drawing, sample, reference image or a new tool requirement. Feasibility, manufacturing options and the next development step are reviewed before quotation and sampling.
CUSTOM SOURCING & DEVELOPMENT
Have a Tool to Source or Develop?
Start with an existing tool, drawing, reference image, physical sample or a clear repair requirement. Tell us what you need and we'll review the most practical sourcing or development route.
connie_fang@coziness.cn
Phone / WhatsApp
+86 13857891035