PRODUCT CATEGORY
Suspension, steering and bearing tools for spring compression, ball joint separation, bearing and bushing work and inner tie rod service. Each tool in the range is built around one of these tasks.
PRODUCTS
Browse our current range of suspension, steering and bearing tools. Select a product to view details and specifications.
A 21-piece ball joint puller kit for removing ball joints, disassembling and assembling U joints, and removing and installing brake anchor pins, working comprehensively with a wide range of vehicles.
A CV joint assembly removal tool kit in carbon steel for separating the CV joint from the axle without removing the drive shaft, with a 30 mm diameter and a 248 mm length.
A 6-piece drive shaft socket set in CR-MO, specifically designed for front hub nuts, with a 12.5 mm (1/2″) driver, 30/32/36 mm 12-point sockets and 14/17/19 mm impact hexagon keys.
A car and truck ball joint splitter in 40Cr and carbon steel with an 18 mm jaw opening, a hardness of HRV 38-40 and a weight of 435 g.
A multi-purpose inner tie rod tool made from 45# carbon steel with phosphating finish, for inner tie rod service with a capacity of 27–42 mm. 1/2″ drive. Weight 0.35 kg.
A press and pull sleeve kit with 22 sleeve size combinations from 34/44 mm up to 80/90 mm, with five threaded rod sizes M10, M12, M14, M16 and M18.
A heavy duty coil spring compressor designed for MacPherson strut assemblies where space under the wheel arch is limited. Safety retaining pins are included. Capacity 2.5″–10.8″.
A universal bearing puller with six size specifications covering 2″ to 10″, made of heat-treated carbon steel with an electrophoresis surface finish.
Tool Families
Four families make up the suspension, steering and bearing range, covering the compressor and puller work carried out during suspension and steering repair.
A heavy duty coil spring compressor for compressing coil springs during suspension work.
A 5-piece ball joint separator arm puller removal kit and a 21-piece ball joint puller kit for separating and pulling ball joints.
A universal bearing puller and a press and pull sleeve kit for bearing and bushing removal and installation.
A multi-purpose inner tie rod tool for inner tie rod service.
Sourcing Suspension, Steering & Bearing
Send the suspension, steering and bearing tools you need and the quantities you are planning. If you want an item from the existing range, a private-label or OEM version, or a change based on a drawing, sample or reference, include that with your inquiry and we can review the requirement from there.
connie_fang@coziness.cn
+86 13857891035