Brake Service Tools
Brake Spring Pliers
Brake spring pliers in carbon steel, 12″ long and 326 g, for removing and installing the spring from the anchor stud.
PRODUCT RANGE
Automotive Repair, Specialty & Hand Tools
Explore seven categories of automotive repair, specialty and hand tools for distributors, importers and aftermarket brands, with wholesale, OEM & private label, and custom development support.
- CATEGORIES
- 7 core tool categories
- SOURCING
- Wholesale · OEM & Private Label
- CUSTOM DEVELOPMENT
- From drawings, samples or requirements
Product Categories
Browse the Range by Category
Seven categories covering the repair and maintenance jobs a workshop handles every day. Open a category to see the tools in that line.
Brake Service Tools
Caliper wind back kits, brake bleeder kits, brake line flaring tools, drum brake tool sets and brake cylinder hones.
Engine Service Tools
Cylinder hones, piston ring compressors, valve stem seal tools and belt tensioner wrenches.
Testing & Diagnostic Tools
Compression testers for petrol and diesel engines, cooling system pressure testers and circuit testers.
Oil & Fluid Service Tools
Oil filter wrenches, oil filter sockets and fluid filling and transfer tools.
Body, Trim & Glass Tools
Windshield and glass removal tools, trim and panel removal sets, and clip pliers.
Suspension, Steering & Bearing Tools
Coil spring compressors, ball joint separators, bearing pullers, press and pull sleeve kits and inner tie rod tools.
Automotive Specialty Hand Tools
Hose clamp pliers, CV boot clamp tools, thread repair kits, inspection mirrors and magnetic pick-up tools.
Brake Service Tools
11 products
View product
Brake Service Tools
Car Disc Brake Pad Spreader Separator
A car disc brake pad spreader separator in carbon steel, 17 cm, for fitting disc brake pads across a range of vehicles including Alfa, Ford, Nissan, GM (Vauxhall/Opel), Peugeot and Renault.
Brake Service Tools
7 PCS Brake Wheel Hub Cleaning Kit
A 7-piece brake wheel hub cleaning kit with a 1/4″ shaft holder and six sanding pads, for front and rear brake hubs and rotors on cars, light trucks and SUVs.
Brake Service Tools
Universal Car Ratchet Caliper Piston Tool
A universal car ratchet caliper piston tool in carbon steel for compressing pistons into calipers, with a capacity of 43-73 mm, a length of 26 cm and a weight of 1.14 kg.
Brake Service Tools
3-In-1 Brake Pipe Bender
A 3-in-1 brake pipe bender in aluminum alloy with channel grooves for 3mm, 4mm and 6mm (1/8″, 3/16″ and 1/4″) O.D. tubing, bending 0° to 90°.
Brake Service Tools
18pcs Hydraulic Flaring Tool Set
An 18-piece hydraulic flaring tool set for forming brake line ends during repair or replacement work. The set covers the clamp pairs and saddles listed in the specifications.
Brake Service Tools
37pcs Brake Caliper Wind Back Tool Kit
A 37-piece brake caliper wind back tool kit for retracting caliper pistons during brake pad replacement. For Audi, BMW, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Saab, Toyota, Volvo, VW and others. Adapter with 3/8″ internal square drive fitting included. For wholesale, OEM and private-label sourcing, send your requirements via the inquiry form or WhatsApp.
Brake Service Tools
Pneumatic Vacuum Brake & Clutch Bleeder Kit, 2pcs
A pneumatic vacuum brake and clutch bleeder kit with a pistol-grip bleeding unit and a 1 L container, for replacing brake fluid and for bleeding brake and clutch systems.
Brake Service Tools
8-Piece Professional Drum Brake Tool Set
A drum brake tool set for brake spring service work, supplied in a blow molded case with a brake spring compressor, installer, removal tool, retaining spring tool, spring plier and two spoons.
Brake Service Tools
Brake Line Flaring Tool
A brake line flaring tool set for forming 45-degree single, double and bubble flares on steel and copper tube, with dies for 3/16″, 1/4″, 5/16″ and 3/8″ tubing.
Brake Service Tools
1-1/8 in. Brake Cylinder Hone, 2-Claw
A 1-1/8 in. two-claw brake cylinder hone with a 3/4″ to 2″ (20-50 mm) capacity range, 28×6 mm stones and a knurled nut for adjustable honing tension.
Sourcing Options
Choose How You Want to Source
Most buyer programs follow one of these three routes. Tell us which fits and we can review the details from there.
01
Wholesale Supply
Source suitable tools from the existing range for distribution, retail and workshop supply. Send your item list and estimated quantities, and multiple categories can be reviewed in one quotation.
02
OEM & Private Label
For suitable existing models, logo, packaging, color and other branding requirements can be reviewed. Samples or specifications are confirmed before production where required.
03
ODM & Custom Development
Start from a drawing, sample, reference image or a new tool requirement. Feasibility, manufacturing options and the next development step are reviewed before quotation and sampling.
CUSTOM SOURCING & DEVELOPMENT
Have a Tool to Source or Develop?
Start with an existing tool, drawing, reference image, physical sample or a clear repair requirement. Tell us what you need and we'll review the most practical sourcing or development route.
connie_fang@coziness.cn
Phone / WhatsApp
+86 13857891035